Package include:
The option allows you to use as many motors as the current controller can support.
53 $
The option allows you to use as many motors as the current controller can support.
Article ER-00013073
In package:
5-AXIS (INDEX), 5-AXIS (CONT), PLASMA + PIPE CUTTER, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
The option allows to attach or detach motors to axis using macro commands. This feature may be useful for cnc machines with two or more heads. For example it is possible to modify M6 tool change macro to move previous tool to parking position, change active motors connected to another tool support for Z and X axes.
Attention!
For this option to work, you must also purchase the option "Create and edit macros."
53 $
The option allows to attach or detach motors to axis using macro commands. This feature may be useful for cnc machines with two or more heads. For example it is possible to modify M6 tool change macro to move previous tool to parking position, change active motors connected to another tool support for Z and X axes.
Attention!
For this option to work, you must also purchase the option "Create and edit macros."
In package:
PLASMA-GAS, FULL MILLING PACKAGE, THERMAL FULL
Option allows to use all supported drilling cycles. The option is required to use G73, G81, G82, G83, G85, G89 commands.
27 $
Option allows to use all supported drilling cycles. The option is required to use G73, G81, G82, G83, G85, G89 commands.
Article ER-00013079
In package:
NORMAL MILLING PACKAGE, FULL MILLING PACKAGE
The feature allows to communicate with devices by the MODBUS protocol via RS-485 bus.
53 $
The feature allows to communicate with devices by the MODBUS protocol via RS-485 bus.
Article ER-00013824
In package:
NORMAL MILLING PACKAGE, FULL MILLING PACKAGE, THERMAL FULL
Option allows to enable analog (ADC) inputs support if available in hardware.
27 $
Option allows to enable analog (ADC) inputs support if available in hardware.
Article ER-00014406
In package:
FULL MILLING PACKAGE, THERMAL FULL
Automatic tool change on CNC machines is performed by special mechanisms with a high response speed for maximum process optimization without operator intervention. This option improves productivity, helps reduce downtime and the time it takes to change a tool. The tool change algorithm can be changed by editing the M6 macro as you like.
Attention!
The feature allowa you to edit the tool change macro (M6)! Doesn't require the active feature "Create and edit macros"!
107 $
Automatic tool change on CNC machines is performed by special mechanisms with a high response speed for maximum process optimization without operator intervention. This option improves productivity, helps reduce downtime and the time it takes to change a tool. The tool change algorithm can be changed by editing the M6 macro as you like.
Attention!The feature allowa you to edit the tool change macro (M6)! Doesn't require the active feature "Create and edit macros"!
In package:
NORMAL MILLING PACKAGE, FULL MILLING PACKAGE
By default, only standard macro modifications are available in the system. This option allows you to remove the restriction on editing standard macros and makes it possible to create your own.
Attention!
The feature does not include the function of editing the tool change macro! (M6)
27 $
By default, only standard macro modifications are available in the system. This option allows you to remove the restriction on editing standard macros and makes it possible to create your own.
Attention!The feature does not include the function of editing the tool change macro! (M6)
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, PLASMA BASE, FULL MILLING PACKAGE, THERMAL FULL
When the feature is turned on a spindle speed override coefficient will be automatically adjusted when a feed rate override coefficient is changed to keep cutting speed constant. This feature is only compatible with milling machines and does not support threading.
27 $
When the feature is turned on a spindle speed override coefficient will be automatically adjusted when a feed rate override coefficient is changed to keep cutting speed constant. This feature is only compatible with milling machines and does not support threading.
In package:
NORMAL MILLING PACKAGE, FULL MILLING PACKAGE
G0 moves are always performed at maximum speed, but this is not always convenient, especially when debugging a control program. This option allows you to redefine the speed of idle crossings (G0) during the operation of the machine, without resorting to editing the parameters of the axes.
13 $
G0 moves are always performed at maximum speed, but this is not always convenient, especially when debugging a control program. This option allows you to redefine the speed of idle crossings (G0) during the operation of the machine, without resorting to editing the parameters of the axes.
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE
Option allows to use special G-code which rotates coordinate system by specified angle. The coordinate system alignment module allows to rotate the machine coordinate system in the XY plane if the workpiece is mounted on a table not strictly parallel to the machine axes. The alignment operation is carried out at two points on one side of the workpiece or by entering the value of the angle of rotation of the coordinate system. Most applicable for thermal cutting of sheet material. Without this option, the use of coordinate system rotation in the G10 command is not available.
40 $
Option allows to use special G-code which rotates coordinate system by specified angle. The coordinate system alignment module allows to rotate the machine coordinate system in the XY plane if the workpiece is mounted on a table not strictly parallel to the machine axes. The alignment operation is carried out at two points on one side of the workpiece or by entering the value of the angle of rotation of the coordinate system. Most applicable for thermal cutting of sheet material. Without this option, the use of coordinate system rotation in the G10 command is not available.
In package:
NORMAL MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
The option allows the use of additional linear axes U, V and W. These axes can be used to control the rigging of the machine and other auxiliary movements. Caution, the U, V, and W axes do not support circular interpolation.
80 $
The option allows the use of additional linear axes U, V and W. These axes can be used to control the rigging of the machine and other auxiliary movements. Caution, the U, V, and W axes do not support circular interpolation.
In package:
FULL MILLING PACKAGE, THERMAL FULL
With multi-axis continuous machining, the rotary axes work continuously, together with the linear axes. Strategies for continuous multi-axis machining of parts allow machining of products with the side surface of the cutter, the end surface of the cutter, at a given angle of the cutter to the surface being machined.
Attention!
Includes the "Rotary axis A in index mode" and the"Multi-axis index processing" options.
160 $
With multi-axis continuous machining, the rotary axes work continuously, together with the linear axes. Strategies for continuous multi-axis machining of parts allow machining of products with the side surface of the cutter, the end surface of the cutter, at a given angle of the cutter to the surface being machined.
Attention!Includes the "Rotary axis A in index mode" and the"Multi-axis index processing" options.
In package:
5-AXIS (CONT), FULL MILLING PACKAGE
The time spent on preparing the trajectory planner to run from an arbitrary line will be significantly less. The larger the file, the greater the effect of this feature. Recommended for milling machines.
13 $
The time spent on preparing the trajectory planner to run from an arbitrary line will be significantly less. The larger the file, the greater the effect of this feature. Recommended for milling machines.
In package:
NORMAL MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
The option allows running the G-Code in any direction from any line in the backward direction. In case of emergency, this function will help you to easily go back a little, moving strictly along the trajectory, so that you can continue processing later.
27 $
The option allows running the G-Code in any direction from any line in the backward direction. In case of emergency, this function will help you to easily go back a little, moving strictly along the trajectory, so that you can continue processing later.
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, FULL MILLING PACKAGE, THERMAL FULL
The option allows you to resume the execution of the control program directly from the place where it was stopped by the STOP command or by the operation of special inputs, such as a "sensor for the door of the protective cabin" or "metal touch sensor with a plasma torch." In this case, the machine makes a regular (non-emergency) stop and the coordinates of the stop point are remembered. After that, you can move the machine as you like, including adjusting it to a convenient place and removing chips from the cutter or completely replacing it. Now just press “Start” and the machine itself will return to the stopping point and continue to execute the G-Code. In this case, the return to the starting point of execution will be made according to the selected mode of return to the trajectory.
40 $
The option allows you to resume the execution of the control program directly from the place where it was stopped by the STOP command or by the operation of special inputs, such as a "sensor for the door of the protective cabin" or "metal touch sensor with a plasma torch." In this case, the machine makes a regular (non-emergency) stop and the coordinates of the stop point are remembered. After that, you can move the machine as you like, including adjusting it to a convenient place and removing chips from the cutter or completely replacing it. Now just press “Start” and the machine itself will return to the stopping point and continue to execute the G-Code. In this case, the return to the starting point of execution will be made according to the selected mode of return to the trajectory.
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
This option allows you to calculate the time remaining until the end of the G-Code. It takes into account the dynamics of the machine and the interpolation algorithms that will be used during operation, which allows to achieve high accuracy of calculations. In addition, the remaining time is instantly recalculated if the user adjusts the feed rate or idle speed during operation.
13 $
This option allows you to calculate the time remaining until the end of the G-Code. It takes into account the dynamics of the machine and the interpolation algorithms that will be used during operation, which allows to achieve high accuracy of calculations. In addition, the remaining time is instantly recalculated if the user adjusts the feed rate or idle speed during operation.
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
This option allows you to use special commands M10 and M11 to instantly turn on/off the digital output without slowing down the movement on the machine. The execution of any macro by default requires a complete stop of the machine movement: as soon as PUMOTIX encounters any M-command, then all the movements specified before the M-command are executed to the end, then the M-command is executed on the stopped machine, and then the movement resumes. M10 and M11 are the only codes that allow you to control outputs on the fly. If between two motion blocks PUMOTIX finds M10 or M11, then the movement between the previous and subsequent commands will be as if there is no M-command between them, but when the machine passes exactly between these commands, the corresponding output will be turned on (M10) or off (M11).
53 $
This option allows you to use special commands M10 and M11 to instantly turn on/off the digital output without slowing down the movement on the machine. The execution of any macro by default requires a complete stop of the machine movement: as soon as PUMOTIX encounters any M-command, then all the movements specified before the M-command are executed to the end, then the M-command is executed on the stopped machine, and then the movement resumes. M10 and M11 are the only codes that allow you to control outputs on the fly. If between two motion blocks PUMOTIX finds M10 or M11, then the movement between the previous and subsequent commands will be as if there is no M-command between them, but when the machine passes exactly between these commands, the corresponding output will be turned on (M10) or off (M11).
In package:
FULL MILLING PACKAGE, THERMAL FULL
The option allows you to create macros that will run in the background, that is, in parallel with the operation of the main program (for example, for intermittent coolant control, monitoring of temperature sensors, etc.).
53 $
The option allows you to create macros that will run in the background, that is, in parallel with the operation of the main program (for example, for intermittent coolant control, monitoring of temperature sensors, etc.).
In package:
NORMAL MILLING PACKAGE, FULL MILLING PACKAGE, THERMAL FULL
By default, only one Client (graphical user interface) can be connected to the Server (control part). This option allows you to connect 2 or more Clients to the same Server, both local (running within the same computer) and remote (running on different computers in the local or global network). The first connected gets full control at once, the rest only reads with the ability to get password control.
53 $
By default, only one Client (graphical user interface) can be connected to the Server (control part). This option allows you to connect 2 or more Clients to the same Server, both local (running within the same computer) and remote (running on different computers in the local or global network). The first connected gets full control at once, the rest only reads with the ability to get password control.
In package:
FULL MILLING PACKAGE, THERMAL FULL