Package include:
The option allows you to use as many motors as the current controller can support.
53 $
The option allows you to use as many motors as the current controller can support.
Article ER-00013073
In package:
5-AXIS (INDEX), 5-AXIS (CONT), PLASMA + PIPE CUTTER, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
The feature allows to control the plasma cutting mode. Option is the minimum necessary for starting a plasma cutting machine.
27 $
The feature allows to control the plasma cutting mode. Option is the minimum necessary for starting a plasma cutting machine.
Article ER-00013103
In package:
PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, PLASMA BASE, THERMAL FULL
When this option is activated, an empty library of plasma cutting parameters becomes available for use, which the machine operator is invited to fill out independently. The library allows you to create, edit, save and restore large sets of parameters with one click for cutting various types of materials.
Attention!
For this option to work, you must also purchase the option "Ignoring Z and F from UP".
13 $
When this option is activated, an empty library of plasma cutting parameters becomes available for use, which the machine operator is invited to fill out independently. The library allows you to create, edit, save and restore large sets of parameters with one click for cutting various types of materials.
Attention!
For this option to work, you must also purchase the option "Ignoring Z and F from UP".
In package:
PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, THERMAL FULL
By default, only standard macro modifications are available in the system. This option allows you to remove the restriction on editing standard macros and makes it possible to create your own.
Attention!
The feature does not include the function of editing the tool change macro! (M6)
27 $
By default, only standard macro modifications are available in the system. This option allows you to remove the restriction on editing standard macros and makes it possible to create your own.
Attention!The feature does not include the function of editing the tool change macro! (M6)
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, PLASMA BASE, FULL MILLING PACKAGE, THERMAL FULL
The Smart Burn option allows reducing the wear of consumables by reducing the contamination of the protective screen with molten metal spatter during the burning of thick materials.
133 $
The Smart Burn option allows reducing the wear of consumables by reducing the contamination of the protective screen with molten metal spatter during the burning of thick materials.
In package:
PLASMA-GAS, PLASMA FULL, THERMAL FULL
G0 moves are always performed at maximum speed, but this is not always convenient, especially when debugging a control program. This option allows you to redefine the speed of idle crossings (G0) during the operation of the machine, without resorting to editing the parameters of the axes.
13 $
G0 moves are always performed at maximum speed, but this is not always convenient, especially when debugging a control program. This option allows you to redefine the speed of idle crossings (G0) during the operation of the machine, without resorting to editing the parameters of the axes.
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE
The option provides much higher quality cutting holes through the use of additional parameters. When using the “Perfect Hole” option, the cut quality becomes comparable to using laser cutting.
80 $
The option provides much higher quality cutting holes through the use of additional parameters. When using the “Perfect Hole” option, the cut quality becomes comparable to using laser cutting.
In package:
PLASMA-GAS, PLASMA FULL, THERMAL FULL
Option allows to use special G-code which rotates coordinate system by specified angle. The coordinate system alignment module allows to rotate the machine coordinate system in the XY plane if the workpiece is mounted on a table not strictly parallel to the machine axes. The alignment operation is carried out at two points on one side of the workpiece or by entering the value of the angle of rotation of the coordinate system. Most applicable for thermal cutting of sheet material. Without this option, the use of coordinate system rotation in the G10 command is not available.
40 $
Option allows to use special G-code which rotates coordinate system by specified angle. The coordinate system alignment module allows to rotate the machine coordinate system in the XY plane if the workpiece is mounted on a table not strictly parallel to the machine axes. The alignment operation is carried out at two points on one side of the workpiece or by entering the value of the angle of rotation of the coordinate system. Most applicable for thermal cutting of sheet material. Without this option, the use of coordinate system rotation in the G10 command is not available.
In package:
NORMAL MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
This option includes a full set of THC control locks in the plasma cutting mode, namely: overvoltage lock, lock to reduce the nominal speed, macro lock from G-Code.
27 $
This option includes a full set of THC control locks in the plasma cutting mode, namely: overvoltage lock, lock to reduce the nominal speed, macro lock from G-Code.
Article ER-00013097
In package:
PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, THERMAL FULL
This option significantly saves the execution time of the control unit, in which there are many small closed loops, by skipping the metal search stage if the previous ignition was carried out in relative proximity to the current one.
133 $
This option significantly saves the execution time of the control unit, in which there are many small closed loops, by skipping the metal search stage if the previous ignition was carried out in relative proximity to the current one.
In package:
PLASMA-GAS, PLASMA FULL, THERMAL FULL
The time spent on preparing the trajectory planner to run from an arbitrary line will be significantly less. The larger the file, the greater the effect of this feature. Recommended for milling machines.
13 $
The time spent on preparing the trajectory planner to run from an arbitrary line will be significantly less. The larger the file, the greater the effect of this feature. Recommended for milling machines.
In package:
NORMAL MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
This option allows you to speed up the standard probing procedure by indicating the safe distance to which the tool will be brought up at an increased speed. With a large number of insertion points, this option can significantly save time spent on the torch leading to the workpiece contact point.
27 $
This option allows you to speed up the standard probing procedure by indicating the safe distance to which the tool will be brought up at an increased speed. With a large number of insertion points, this option can significantly save time spent on the torch leading to the workpiece contact point.
In package:
PLASMA-GAS, PLASMA FULL, THERMAL FULL
The option allows running the G-Code in any direction from any line in the backward direction. In case of emergency, this function will help you to easily go back a little, moving strictly along the trajectory, so that you can continue processing later.
27 $
The option allows running the G-Code in any direction from any line in the backward direction. In case of emergency, this function will help you to easily go back a little, moving strictly along the trajectory, so that you can continue processing later.
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, FULL MILLING PACKAGE, THERMAL FULL
The option allows you to pass the G-Code without issuing commands to ignite the arc. The function has a number of parameters, such as simulation speed, height, and also allows you to evaluate the dimensions of the product and make sure that it fits on the sheet. Additionally, the option allows you to mark a thick sheet for drilling holes for tapping, stopping above each tapping point for marking by the operator.
80 $
The option allows you to pass the G-Code without issuing commands to ignite the arc. The function has a number of parameters, such as simulation speed, height, and also allows you to evaluate the dimensions of the product and make sure that it fits on the sheet. Additionally, the option allows you to mark a thick sheet for drilling holes for tapping, stopping above each tapping point for marking by the operator.
In package:
PLASMA-GAS, PLASMA FULL, THERMAL FULL
The option allows you to resume the execution of the control program directly from the place where it was stopped by the STOP command or by the operation of special inputs, such as a "sensor for the door of the protective cabin" or "metal touch sensor with a plasma torch." In this case, the machine makes a regular (non-emergency) stop and the coordinates of the stop point are remembered. After that, you can move the machine as you like, including adjusting it to a convenient place and removing chips from the cutter or completely replacing it. Now just press “Start” and the machine itself will return to the stopping point and continue to execute the G-Code. In this case, the return to the starting point of execution will be made according to the selected mode of return to the trajectory.
40 $
The option allows you to resume the execution of the control program directly from the place where it was stopped by the STOP command or by the operation of special inputs, such as a "sensor for the door of the protective cabin" or "metal touch sensor with a plasma torch." In this case, the machine makes a regular (non-emergency) stop and the coordinates of the stop point are remembered. After that, you can move the machine as you like, including adjusting it to a convenient place and removing chips from the cutter or completely replacing it. Now just press “Start” and the machine itself will return to the stopping point and continue to execute the G-Code. In this case, the return to the starting point of execution will be made according to the selected mode of return to the trajectory.
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
When starting G-Code from the middle of the File, the system will not perform a standard countdown of the burn delay after the ArcOk signal is resolved, but will immediately begin to move along the contour. Such a mechanism makes it possible to make an almost perfect joint without thickening at the starting point.
Attention!
For this option to work, it is also necessary to purchase the option "Continuation of the G-Code from the middle of the path (frame)".
40 $
When starting G-Code from the middle of the File, the system will not perform a standard countdown of the burn delay after the ArcOk signal is resolved, but will immediately begin to move along the contour. Such a mechanism makes it possible to make an almost perfect joint without thickening at the starting point.
Attention!
For this option to work, it is also necessary to purchase the option "Continuation of the G-Code from the middle of the path (frame)".
In package:
PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, THERMAL FULL
This option allows you to calculate the time remaining until the end of the G-Code. It takes into account the dynamics of the machine and the interpolation algorithms that will be used during operation, which allows to achieve high accuracy of calculations. In addition, the remaining time is instantly recalculated if the user adjusts the feed rate or idle speed during operation.
13 $
This option allows you to calculate the time remaining until the end of the G-Code. It takes into account the dynamics of the machine and the interpolation algorithms that will be used during operation, which allows to achieve high accuracy of calculations. In addition, the remaining time is instantly recalculated if the user adjusts the feed rate or idle speed during operation.
In package:
NORMAL MILLING PACKAGE, BASIC MILLING PACKAGE, PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, FULL MILLING PACKAGE, THERMAL FULL
The option allows you to disable in the system in the plasma or gas-oxygen cutting mode the interpretation of the movement commands along the Z axis and the job feed F from the text of the control program. Thus, all movements along the Z axis and the feedrate F are completely controlled by the parameters available in the program interface.
133 $
The option allows you to disable in the system in the plasma or gas-oxygen cutting mode the interpretation of the movement commands along the Z axis and the job feed F from the text of the control program. Thus, all movements along the Z axis and the feedrate F are completely controlled by the parameters available in the program interface.
In package:
PLASMA-GAS, PLASMA FULL, PLASMA ADVANCED, THERMAL FULL